To repair and area of drywall that has been broken you will want sheet rock, a utility knife, quick dry-low dust joint compound, mesh tape for drywall, one inch galvanized drywall screws, a drill, drywall knife and a drywall sanding block. Then cover it with patching compound as you’d for another wall restore. Drywall knife to apply the primary layer of drywall compound over the tape. As an alternative get a wider taping knife—a 6-in.-broad putty knife will do—and easily skim your entire area with joint compound.
Trim the tough edges of drywall across the patch. Use a drywall knife to cover the patch with light-weight joint compound in a crisscross sample, feathering the edges so it blends with the wall. Embed the tape and cover the whole space with a thin coat of drywall compound, and complete the restore as described in the steps above.
Let one facet dry before making use of compound to the other aspect. Cowl the hole or dent with quick-drying spackle to convey the spackle degree with the drywall floor and let it dry 24 hours – or the time beneficial by the producer’s directions. For small holes, like those created by a doorknob, a patch package could also be used.
The overall average value to repair a drywall ceiling is between $320 and $1,300. If you’re patching tiny nail holes, you’ll be able to cowl up the repairs by dabbing on touch-up paint with a gentle material. The first step of the repair is to drive nails again down using a nail set (Picture 1). When you have screws, dig the drywall compound from their heads with a utility knife and switch them in tight with a screwdriver.
To make use of the patch, simply clean the wall floor and sand it to provide the surface a bit of ‘tooth.’ Then stick the patch over the outlet and canopy it with two or three skinny layers of joint compound. Let it dry and cover it with paint to finish the repair.