Lately screws are considered better for attaching drywall, but there are nonetheless places the place nails are predominantly used. Photograph 1: Lower by way of the tape on the ends of the cracked space and slice, scrape and tear away all free tape and compound. Before the drywall compound dries, add texture to it with a short-handled stomping brush. First, twist a utility knife into the wall to carve away the joint compound from above a popped nail or screw.
Whereas the compound continues to be moist, place a strip of fiberglass tape over the seam, bridging the gap between the ends of the present tape (picture four). Use a putty knife to gently flatten wrinkles and to bed the tape into the compound. Try to blend this coat as seamlessly as possible onto the wall floor.
End the repair with several coats of drywall compound. Minimize alongside the traces on the wall with a drywall knife. It is not obligatory to strengthen the horizontal edges of the replacement drywall. For a knock-down finish – one where a trowel presses joint compound all the way down to kind a texture that is extra mottled than a flat wall – calmly flatten the particles with a knife because the compound combination begins to dry.
Although this bead is injury-resistant, a pointy knock can cause the drywall compound that covers it to crack or chip off, and a strong sufficient shock can dent or bend the nook bead. Cowl the patch and tape with joint compound, feathering the edges. Drywall is relatively simple to put in and easy to repair.
Picture 3: Fill the holes with joint compound, swiping first across the holes, then down. Scrape away any unfastened compound, and use a razor knife or drywall noticed to increase the crack by means of the wall surface into the stud cavity (picture three). Avoid eradicating strong, effectively-adhered compound beyond the crack itself.